Additional Wire Machine Post Profiles - TEXT

Additional Wire Machine Post Profiles - TEXT







With the introduction of Version 2022, you now have the possibility to install directly your machine profile, meaning you have multiple machines from the same Mfg. but different models.


VIDEO VERSION CAN BE SEEN AT THE LINK BELOW

You can install the postprocessor more than one time and choose at every pp installation the correct machine model.
                

 

 After installing the system with the first postprocessor.  Return to the installation files and find the folder “*\OpticamClassicV2022\Postprocessor\Wire\(Machine Folder)” for your needs.  Double Click the Setup.exe file  and then you can choose again the postprocessor you need, and choose in the installation routine the next machine profile

        










     
     











         

Once Complete repeat the process as needed until you have the necessary Machine Models installed.
Now you will see them listed in your folder individually.

 

 If you need any assistance with this please let us know by emailing support@optisolutionsusa.com






    • Related Articles

    • Creating Multiple Post Processor Profiles V8.2 and Prior

      Creating Multiple Post Processor Profiles ​In the attached video, you can see how to create a second profile for a post. If you want to have a second profile for a different machine or just have different post processor settings.
    • Installation and Set-Up of ACCut C/E/P Series and ACCut X00 Post Processors and EDM Expert

      Installation and Set-Up of ACCut C/E/P Series and ACCut X00 Post Processors and EDM Expert  Outline -------------------- - Installation and Set-Up of ACCut C/E/P Series and ACCut X00 Post Processors - Installation and Set-Up of EDM Expert  These ...
    • Opticam Classic Uniqua Post Settings

      Hello, With the new Uniqua post some settings will need to be set up to make sure that the post is working correctly. There are 2 Options to Post for that Machine. Dynamic or Sequential. For more information into what the differences are you will ...
    • Hardware License Removal

      Hardware License Removal If you need to remove an existing hardware-based license you will need to enable the registry to allow the removal. Download the attachments and follow the below instructions for removal. Open the CodeMeter Control Center ...
    • Downloading and Installing PEPS/OPTICAM Classic

      Downloading & Installing PEPS/OPTICAM Classic IMPORTANT: If you are upgrading from an older version of PEPS/OPTICAM Classic: - Follow the separate Knowledge Base instructions on how to update your license first with the latest major version's ...