CodeMeter WebAdmin displays an empty page in the browser

CodeMeter WebAdmin displays an empty page in the browser

CodeMeter WebAdmin displays an empty page in the browser

Click on the link below to go to the Wibu Support Page.



Open the settings by using the workstation’s IP address instead of Local Host

If it doesn't let you delete the server address and the option is greyed out. You might need to log in with Local Admin Rights.

Stop the Code Meter service, delete the wrong server entry from the registry and try again.

    • Related Articles

    • CodeMeter Network License Setup (Floating License)

      CodeMeter Network License Setup (Floating License) NOTE: Installation of the floating license option may require an IT specialist who is familiar with the network security on your particular network. Firewalls and other factors such as port blocking ...

    • OPTICAM/OPTICAM Classic is slow to start (Network License)

      OPTICAM/OPTICAM Classic is slow to start (Network License) Please ask your IT to check the CodeMeter server IP/host name in the CodeMeter Control Center's WebAdmin page, on each client. It could be it is looking for another server first, then timing ...

    • Connecting to our CodeMeter Server

      1) Create a VPN connection The server address is: codemeteroptisolutions.asuscomm.com or, if no success, try: codemeter.optisolutionsusa.com VPN Type: Point to point Tunneling Protocol (PPTP) User: <provided via email> Password: nucleo2@2x 2) Connect ...

    • Checking your license is active/accessible

      Checking your license is active/accessible ​Symptom: Remedies: 1) Check your key (dongle) is connected to your PC. You should see it in the CodeMeter Control Panel.       - To start the Control Panel, in Windows 10, type "Code Meter Control Center" ...

    • Codemeter License Good but Program not Opening

      If you have checked and verified that the dates are correct for the license and everything else looks good you will want to check the system times on the PC and CMContainer in the CMContainer dialog. As you can see in the above picture the System ...