Network Licensing
Makino Taper Errors at Machine
The Makino Control as a setting in the Others Page called Taper and can be set to 0 or 1 Taper 0 - No taper is cut and you will get a Warning 1022 error message if there is taper code in the program. Taper 1 - Allows the machine to cut tapers If you ...
PEPS/Opticam Quick Start Guide
Please find attached the quick start guide and training exercises for the PEPS/Opticam Wire EDM Software. Below is a link to a YouTube Playlist that covers each of the exercises. We recommend subscribing to the Channel as there are other tips and ...
Example of using Shut Off Boundary to create correct blade geometry
Do you have blades that are built that look like this, with the taper, when it appears it should be straight. To explain why this is happening is to better understanding how we "slice" the geometry to create the point cloud. Because the ID Hole of ...
Permissions Change after Online Update
If during the Online Update the user can no longer Open the software and receives a message similar to those below It can be that windows "knows" that this exe is coming from the internet. With the NFTS filesystem it is possible to hold this ...
Installing a new license or updated license
Installing a new license or updated license PREREQUISITE: You will need to log in as an administrator before installing the license. OPTICAM or OPTICAM Classic must be installed first. At the minimum, the CodeMeter runtime must be installed ...
OPTICAM/OPTICAM Classic is slow to start (Network License)
OPTICAM/OPTICAM Classic is slow to start (Network License) Please ask your IT to check the CodeMeter server IP/host name in the CodeMeter Control Center's WebAdmin page, on each client. It could be it is looking for another server first, then timing ...
Floating License: ROOT License no available | Missing Security Device / Module not Enabled
Floating License: ROOT License no available | Missing Security Device / Module not Enabled Check with IT that the server where the dongle is connected, is online and accessible. Also, ask them to check your CodeMeter Control Panel -> WebAdmin web ...
Using a CodeMeter network license in a Virtualized Server Environment
Preface Certain end-users will want to share their CodeMeter licenced-OPTICAM software across a network/enterprise. This is possible using an optional network license that "floats" the software on the LAN. The license can serve just one seat or "x" ...
CodeMeter Network License Setup (Floating License)
CodeMeter Network License Setup (Floating License) NOTE: Installation of the floating license option may require an IT specialist who is familiar with the network security on your particular network. Firewalls and other factors such as port blocking ...