Blade Line Questions and Answers
Modifying Existing Fixture Blades
Please refer to our YouTube video below for steps in modifying a fixture blade. Modify Existing Fixture Blade
Nucleo - Adding Edge Detail (additional material)
Nucleo - Adding Edge Detail (additional material) When Nucleo offsets the part in the fixture, it offsets on all sides around the perimeter of the solids. You may want to add some material back in some rare instances, and this article explains how ...
Nucleo - why is the blade cut off?
Nucleo - why is the blade cut off? Consider this blade: This is deliberate. It is based on this parameter: ... which sets the angular tolerance to a smaller number for you (on the right). The thought process was that in most cases, this shape isn't ...
Using pre-existing lines to denote Nucleo Fixture Blade positions
Using pre-existing lines to denote Nucleo Fixture Blade positions Please refer to this video: https://www.youtube.com/watch?v=alBidNJMoq4&feature=youtu.be
Troubleshooting blades that don't appear or create properly
Troubleshooting blades that don't appear or create properly "Hi Matt, The one that was bigger and red, nearer the front was due to you having two fixture lines on top of each other. You can find this out by hiding the fixture, then using the "Get ...