AMD/ATI Graphic Cards
For Users with AMD Graphic Cards, you need to make sure you are running the latest software and drivers available for your card. Below is a link to the AMD Driver website. You may need your IT dept to install these items for you.
AMD has changed how to force certain applications to use dedicated GPU.
In order to do this please watch the link below on options that you can use to do this.
In Nucleo, Right Click on the screen and select View Properties.
Next Uncheck the box for Smoothly Rotate View
Now select General on the Left Column at the Bottom
Next Checked the box to Use GDI for Crosshairs.
(The reason for this was the crosshairs were slowly digitizing across the screen or selecting items is difficult)
19 Jan 2022 01:43 PM
If none of those options above work, you will need to disable your Intel Onboard graphics. You can do this by using the Device Manager, selecting the Display Adapters from the list, and then Right Click on Intel UHD Graphics and disabling it.
A PC restart may be needed for it to take full effect.
Related Articles
How to force use of the correct GPU (graphics card) for OPTICAM / Using the Correct Graphics Port
How to force use of the correct GPU (graphics card) for OPTICAM / Using the Correct Graphics Port NOTE: IF USING A DESKTOP PC ENSURE THE CORRECT PORT IS CONNECTED TO THE DISPLAY CABLE. DO NOT CONNECT TO THE ONBOARD GRAPHICS CARD PORT (IF ANY). ...OPTICAM Classic/Nucleo 2023 System Specifications
OPTICAM Classic/Nucleo 2022 System Specifications TECHNICAL SPECIFICATIONS OPTICAM Classic/Nucleo 2023 Supported Operating Systems OPTICAM Classic V8.2 Windows 7 64-Bit Windows 8 64-Bit Windows10 64 Bit Windows10 64 Bit OPTICAM Classic 2023 Windows ...PEPS-OPTICAM Classic/Nucleo System Specifications
TECHNICAL SPECIFICATIONS PEPS-OPTICAM Classic/Nucleo V2022-Current Release OPTICAM Classic V8.2 and Prior - NO LONGER SUPPORTED Supported Operating Systems PEPS-OPTICAM CLASSIC 2022-Current Windows10 64-Bit Windows 11 64-bit Nucleo 2022-Current ...OPTICAM Classic/PEPS crashes without any error
OPTICAM Classic/PEPS crashes without any error Symptoms When using the application, such as the WEDM module - the software just crashes out completely during creating operations such as a profile op etc. Troubleshooting Turn off antivirus to see if ...OPTICAM/Nucleo is slow
OPTICAM/Nucleo is slow Should OPTICAM/Nucleo start slowly or be slow to respond to dialogs or at start-up - check the following: 1) The PC is up to the necessary specification. 2) The PC isn't a notebook that is using an integrated Intel graphics ...