Makino Taper Errors at Machine

Makino Taper Errors at Machine

The Makino Control as a setting in the Others Page called Taper and can be set to 0 or 1

Taper 0 - No taper is cut and you will get a Warning 1022 error message if there is taper code in the program.

Taper 1 - Allows the machine to cut tapers

If you are trying to cut a taper on your machine and are getting a Warning 1022 error message please check this setting to make sure it is set to Taper 1





If that is set to Taper 1 and you are still getting some error message on the machine please contact support@optisolutionsusa.com





    • Related Articles

    • Makino Machine Condition Database Version Info Hyper-i Control

      In order to select the correct Makino Technology Database for your machine you will need to give us the below information.  If you could take a picture with a Cell Phone and email it that would be the best method.  If not then we need the System ...

    • Additional Wire Machine Post Profiles - TEXT

      With the introduction of Version 2022, you now have the possibility to install directly your machine profile, meaning you have multiple machines from the same Mfg. but different models. VIDEO VERSION CAN BE SEEN AT THE LINK BELOW Additional Wire ...

    • How to download from our Customer Transfer Page

      How to download from our Customer Transfer Page Go to: https://www.optisolutionsusa.com/transfer This page requires a password: C@mT3k Click the "Open Customer File Transfer Page" button: In the next window, you’ll see the Customer Transfer area: ...

    • CodeMeter WebAdmin displays an empty page in the browser

      CodeMeter WebAdmin displays an empty page in the browser Click on the link below to go to the Wibu Support Page. https://www.wibu.com/us/support/faq/detail/why-does-codemeter-webadmin-display-an-empty-page-in-the-browser.html Open the settings by ...

    • OPTICAM Classic/PEPS crashes without any error

      OPTICAM Classic/PEPS crashes without any error Symptoms When using the application, such as the WEDM module - the software just crashes out completely during creating operations such as a profile op etc. Troubleshooting Turn off antivirus to see if ...